Qingdao Yunwhua Industry Co.,Ltd.
Products
Contact Us
  • Contact Person : Mr. Jackie Wang
  • Company Name : Qingdao Yunwhua Industry Co.,Ltd.
  • Tel : 86-532-80771657
  • Fax : 86-532-80771657
  • Address : Shandong,Qingdao,#2-1-901Room,No.16 Fuzhou South Road, Shinan District, Qingdao City,Shandong Province,China
  • Country/Region : China
  • Zip : 266000

Tesla High Resistance Silicon Rubber Cables

Tesla High Resistance Silicon Rubber Cables
Product Detailed
Related Categories:Agricultural Product Stock
Tesla high resistance silicon rubber cablesProduct description: Tear resistant silicone rubber cable properties: high resistance to tear silicone rubber cable is suitable for steel, metallurgy, power plants, coking plant, aviation, metallurgy, machinery, petroleum, chemical and other high-temperature, mobile industry. Rated voltage 0.6 / 1KV and below the power, control and monitoring circuit. Tear resistant silicone rubber cable with excellent high temperature resistance, flame resistance, radiation resistance, aging resistance, ozone, soft, water and other characteristics, but also has good cold resistance, weatherability. Have better mechanical properties, more wear-resistant than ordinary silicone rubber cable, tensile strength, have excellent insulation properties. long lasting.High resistance to tear properties of silicone rubber cables:1 Rated voltage: ∪0 / ∪ is 0.6 / 1KV and below.2 cable operating temperature range: -60 ℃ - + 180 ℃.3 short-circuit conductor temperature does not exceed 250 ℃.4 tear resistant silicone rubber cable laying temperature should not be less than -20 ℃.5 tear resistant silicone rubber cable bending radius as follows: single-core cable bend radius not less than the cable diameter 15D; (D- cable diameter) three-core cable bending radius of not less than the cable diameter 12D.Technical parameters tear resistant silicone rubber cable: 1. Finished cable conductor DC resistance at 20 ℃: should meet GB / T3956 standard requirements, finished cable conductive core DC resistance, converted to a cable length of 1m, nominal cross-section of 1mm2 and temperature is 20 ℃, copper wire core should be less than 0.0184Ω.2 finished cable insulated core insulation resistance: Finished cable insulation core insulation resistance converted to a cable length of 1KM and temperature is 20 ℃, the conductive core cross section 50mm2 and the following shall not be less than 50MΩ, 70-185mm2 of It shall be not less than 35MΩ.3 finished cable should withstand the test frequency AC voltage 3000V \ 5min voltage test, no insulation breakdown.


Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.